A fully mechanical clock with a completely original design for all mechanism components. Uniquely engineered with a background of aerospace engineering approaches to design philosophy, it includes a simple precision pendulum escapement and custom involute gear train with separate hour, minute, and second hand faces designed to fully display the mechanical beauty of the mechanism that makes it function.
Depending on the height at which it is mounted on your wall, it will run for 3 to 4 days before needing a rewinding, easily done in seconds with the included crank and embedded ratcheting mechanism. With the pendulum properly & continuously tuned, it can stay accurate within the minute, over a span of several days or even weeks.
The square board is 2 ft. x 2 ft., with a 3 ft. long pendulum. It is very large, designed to be an art piece that is fully functional. Its size alone created many design challenges, which ultimately limited its running duration before rewinding; but I decided it was worth the sacrifice just to see it work and appreciate the beauty of mechanical engineering.
Same Product as the standard New Modern Renaissance Wall Clock, but not assembled, leaving the printing and assembly up to the user as a project.
There is nothing to buy for this version directly from NCL - despite price tag on this page. So do not “add to cart”. Depending on “how DIY” you want to go for this project, you’ll likely only have to spend $150-200 for the DIY Version. Please follow the outline below.
The 3D Print Files for this product can be found for free at the “MAKER WORLD PROFILE PAGE” link at the top of this site. See the model post with the same name as this page’s product. First, download them and begin the print process while you read the assembly work instructions here:
[placeholder for KDP link]
All of the hardware in the design except for the Base Board (BM0) and the 3/8” shafts can be bought from Amazon. Please see the links below to purchase them.
Disclaimer: These are affiliate links; therefore I earn a small proceed for the traffic I am directing to these products. However, I sought these items out myself.
Screws (SC01): https://amzn.to/3PD9UKL
Pendulum Rods (SH012): https://amzn.to/49IraFa
8mm Gear Shafts (SH2004): https://amzn.to/3P3iEK6
Wall Mount Screws (SC02): https://amzn.to/4wqxZVR
3/8” Shaft Bearings (BRNG01) (Amazon order Qty x2): https://amzn.to/3R5s9cg
Bones Reds Bearings for 8mm shafts (BRNG02): https://amzn.to/3PGuEkR
10-lb Weight (W1): https://amzn.to/4uFyf1l
Miniature Level (LV1): https://amzn.to/4tBlMem
Fender Washers (WSH01): https://amzn.to/4u7kPeC
Bones Speed Cream Lubricant (LU01): https://amzn.to/3PB3b44
Nylon String for Spool Weight (ST01): https://amzn.to/3RB2aJM
Two options:
Order a single 24” shaft and cut it yourself according to the assembly instructions. (Less expensive, more work)
Order the shafts pre-cut according to the following lengths and quantities:
4 inches - QTY x2
3.5 inches - QTY x1
3 inches - QTY x1
2.5 inches - QTY x2
1.5 inches - QTY x1
Here is the link to the exact rod product on Online Metals:
Have an associate cut this in half for you to a 2×2 ft board:
Any questions, comments, concerns? Please use the contact page, and I will get back to you ASAP!
A fully mechanical clock with a completely original design for all mechanism components. Uniquely engineered with a background of aerospace engineering approaches to design philosophy, it includes a simple precision pendulum escapement and custom involute gear train with separate hour, minute, and second hand faces designed to fully display the mechanical beauty of the mechanism that makes it function.
Depending on the height at which it is mounted on your wall, it will run for 3 to 4 days before needing a rewinding, easily done in seconds with the included crank and embedded ratcheting mechanism. With the pendulum properly & continuously tuned, it can stay accurate within the minute, over a span of several days or even weeks.
The square board is 2 ft. x 2 ft., with a 3 ft. long pendulum. It is very large, designed to be an art piece that is fully functional. Its size alone created many design challenges, which ultimately limited its running duration before rewinding; but I decided it was worth the sacrifice just to see it work and appreciate the beauty of mechanical engineering.
Same Product as the standard New Modern Renaissance Wall Clock, but not assembled, leaving the printing and assembly up to the user as a project.
There is nothing to buy for this version directly from NCL - despite price tag on this page. So do not “add to cart”. Depending on “how DIY” you want to go for this project, you’ll likely only have to spend $150-200 for the DIY Version. Please follow the outline below.
The 3D Print Files for this product can be found for free at the “MAKER WORLD PROFILE PAGE” link at the top of this site. See the model post with the same name as this page’s product. First, download them and begin the print process while you read the assembly work instructions here:
[placeholder for KDP link]
All of the hardware in the design except for the Base Board (BM0) and the 3/8” shafts can be bought from Amazon. Please see the links below to purchase them.
Disclaimer: These are affiliate links; therefore I earn a small proceed for the traffic I am directing to these products. However, I sought these items out myself.
Screws (SC01): https://amzn.to/3PD9UKL
Pendulum Rods (SH012): https://amzn.to/49IraFa
8mm Gear Shafts (SH2004): https://amzn.to/3P3iEK6
Wall Mount Screws (SC02): https://amzn.to/4wqxZVR
3/8” Shaft Bearings (BRNG01) (Amazon order Qty x2): https://amzn.to/3R5s9cg
Bones Reds Bearings for 8mm shafts (BRNG02): https://amzn.to/3PGuEkR
10-lb Weight (W1): https://amzn.to/4uFyf1l
Miniature Level (LV1): https://amzn.to/4tBlMem
Fender Washers (WSH01): https://amzn.to/4u7kPeC
Bones Speed Cream Lubricant (LU01): https://amzn.to/3PB3b44
Nylon String for Spool Weight (ST01): https://amzn.to/3RB2aJM
Two options:
Order a single 24” shaft and cut it yourself according to the assembly instructions. (Less expensive, more work)
Order the shafts pre-cut according to the following lengths and quantities:
4 inches - QTY x2
3.5 inches - QTY x1
3 inches - QTY x1
2.5 inches - QTY x2
1.5 inches - QTY x1
Here is the link to the exact rod product on Online Metals:
Have an associate cut this in half for you to a 2×2 ft board:
Any questions, comments, concerns? Please use the contact page, and I will get back to you ASAP!
